P365 Optic Cut: Romeo Zero / Holosun 407k/507k / Shield RMSC
This Machining service allows you to mount a Holosun 407k/507k, Romeo Zero, or Shield RMSC optic onto your supplied P365 slide. This optic cut is NOT COMPATIBLE with the optional Romeo Zero Shroud. Please email if you need a cut that is compatible with the optional shield(will not be compatible with other optics). The mounting pocket is placed in front of the rear dovetail cut by default. If you want to move the optic all the way to the rear and delete the rear dovetail in the process, type “DELETE DOVETAIL” in the notes section at checkout. The slide is drilled and tapped to accept 4mm screws. An optional coverplate is availble for $40(email prior to ordering if requesting coverplate).
For cowitnessing, i reccomend the Trijicon SG101o sights. If you wish to retain your factory sights, the factory front sight when used with the rear optic sight notch will work as a backup, however it will be in the very bottom of the optic lens.
This service requires you first send in your factory slide for the machining to be done. Include a cover letter with your information when sending in your slide. Fabricated Arms will send the machined slide back to you when complete. Slide will be returned to you with a raw machined pocket unless you request your slide to be cerakoted. An additional cerakote service is available under the cerakote tab. If you send the optic along with the slide, the optic will be installed for no additional charge.