SP2022 Optic Cut: Romeo Zero / Holosun 407k/507k / Shield RMSC

This Machining service allows you to mount a Holosun 407k/507k, Romeo Zero, or Shield RMSC optic onto your supplied SP2022 slide. The optic is milled forward of the rear sight. This optic cut is NOT COMPATIBLE with the optional Romeo Zero Shroud. Please email if you need a cut that is compatible with the optional Romeo Zero shroud(will not be compatible with other optics).   The slide is drilled and tapped to accept M4 screws. If you have a slide with deep internal lightening cuts, a stainless steel plug will be epoxied into the lightening cut to provide material to drill and tap into. Your plunger will be shortened. IF your slide is an LCI equipped model, the LCI will be rendered inoperable.

If you want Fabricated Arms to supply you with an optic and install it, select an optic from the drop down menu.

Cerakote is an additional service and can be found HERE

This service requires you send in your factory slide for the machining to be done. Fabricated Arms will disassemble and reassemble your slide if you choose to not do so yourself. Include a cover letter with your information when sending in your slide. Fabricated Arms will send the machined slide back to you when complete. Slide will be returned to you with a raw machined pocket unless you request your slide to be cerakoted. An additional cerakote service is available under the cerakote tab. It is preferred that you send your optic along with your slide to ensure proper fitment.