Romeo1 to Trijicon RMR Conversion

$50. 00

This Machining service allows you to mount a Trijicon RMR optic onto your supplied P320 Xcarry or RX slide with existing Romeo1 optic cut. The front of the pocket is slightly contoured to allow the optic to seat flush and two new holes are drilled and tapped. You will still be able to use your factory coverplate as well as the romeo1 if you desire. This service is not available for the X Five! The lightening cut underneath of the optic cut prevents this.

This service requires you first send in your factory slide for the machining to be done. Include a cover letter with your information when sending in your slide. Fabricated Arms will send the machined slide back to you when complete. Slide will be returned to you with a raw machined pocket unless you request your slide to be cerakoted. An additional cerakote service is available under the cerakote tab. RMR cut may be also adjusted to suit your specific needs, additional pricing may apply. It is preferred that you send your optic along with your slide to ensure proper fitment.