P320 Optic Cut: RMR

This Machining service allows you to mount a RMR footprint optic onto your supplied P320slide. The mounting pocket is milled .150″ deep and placed infront of the rear dovetail cut. The front of the pocket is radiused to perfectly match the front contour of the RMR. The slide is drilled and tapped to accept 6-32 screws. There are threaded posts around the screw holes to locate and secure the optic.

Cerakote is an additional service and can be found HERE

This service requires you send in your factory slide for the machining to be done. Fabricated Arms will disassemble and reassemble your slide if you choose to not do so yourself. Include a cover letter with your information when sending in your slide. Fabricated Arms will send the machined slide back to you when complete. Slide will be returned to you with a raw machined pocket unless you request your slide to be cerakoted. An additional cerakote service is available under the cerakote tab. It is preferred that you send your optic along with your slide to ensure proper fitment.