SP2022 Optic Cut: Trijicon RMRcc

This Machining service allows you to mount a Trijicon RMRcc optic onto your supplied P250 slide. This service allows you to mount the RMRcc directly to your P250 slide, no adapter plates are needed. The rear sight MUST be sent with the slide as the front face needs to be machined slightly to clear the optic.  The slide is drilled and tapped to accept the hardware Trijicon supplies with the RMRcc(look under the foam in your box, there will be screws and a sealing plate). If you have a slide with deep internal lightening cuts, a stainless steel plug will be epoxied into the lightening cut to provide material to drill and tap into.

If you want Fabricated Arms to supply you with an optic and install it, select an optic from the drop down menu.

Cerakote is an additional service and can be found HERE

This service requires you send in your factory slide for the machining to be done. Fabricated Arms will disassemble and reassemble your slide if you choose to not do so yourself. Include a cover letter with your information when sending in your slide. Fabricated Arms will send the machined slide back to you when complete. Slide will be returned to you with a raw machined pocket unless you request your slide to be cerakoted. An additional cerakote service is available under the cerakote tab. It is preferred that you send your optic along with your slide to ensure proper fitment.