P320 optic conversion: Romeo1 to Romeo1Pro/Delta Point Pro

This Machining service allows you to mount a Sig Romeo1Pro or Delta Point Pro footprint optic onto your supplied P320 slide with existing Romeo1 optic cut. The front of the pocket is slightly contoured to allow the optic to seat flush and existing holes are redrilled and tapped to accept larger M4 hardware. You will not be able to use your factory coverplate after this conversion.

If you want Fabricated Arms to supply you with an optic and install it, select an optic from the drop down menu.

Cerakote is an additional service and can be found HERE

This service requires you send in your factory slide for the machining to be done. Fabricated Arms will disassemble and reassemble your slide if you choose to not do so yourself. Include a cover letter with your information when sending in your slide. Fabricated Arms will send the machined slide back to you when complete. Slide will be returned to you with a raw machined pocket unless you request your slide to be cerakoted. An additional cerakote service is available under the cerakote tab. It is preferred that you send your optic along with your slide to ensure proper fitment.