Trijicon RMR/SR0/Holosun 507c Cut

$100. 00

This Machining service allows you to mount a Trijicon RMR/SRO/Holosun 507c optic onto your supplied Glock slide. The mounting pocket is milled to .150″ deep and placed infront of the rear dovetail cut. The front of the pocket is milled to a radius to perfectly match the front contour of the RMR. The slide is drilled and tapped to accept the 6-32 screws supplied by Trijicon with their Glock RMR mounting kit. There are raised bosses around the screw holes to locate and secure the optic. A cover plate and mounting screws can be made for an additional cost if requested.

This service requires you first send in your factory slide for the machining to be done. Include a cover letter with your information when sending in your slide. Fabricated Arms will send the machined slide back to you when complete. Slide will be returned to you with a raw machined pocket unless you request your slide to be cerakoted. An additional cerakote service is available under the cerakote tab. RMR cut may be also adjusted to suit your specific needs, additional pricing may apply. It is preferred that you send your optic along with your slide to ensure proper fitment.