Steyr Optic Cut: Trijicon RMR/SR0/Holosun 507c footprint

This Machining service allows you to mount a Trijicon RMR/SRO/Holosun 507c footprint optic onto your supplied Steyr slide(Steyr M series all L,M,C,9mm,and 40cal variations). The milled pocket is placed infront of the rear dovetail cut. The front of the pocket is milled to a radius to perfectly match the front contour of the RMR. The slide is drilled and tapped to accept 6-32 screws. There are recoil lugs to locate and secure the optic.

If want Fabricated Arms to supply you with an optic and install it, select an optic from the drop down menu.

Cerakote is an additional service and can be found HERE

This service requires you first send in your factory slide for the machining to be done. Include a cover letter with your information when sending in your slide. Fabricated Arms will send the machined slide back to you when complete. Slide will be returned to you with a raw machined pocket unless you request your slide to be cerakoted. An additional cerakote service is available under the cerakote tab. It is preferred that you send your optic along with your slide to ensure proper fitment.