SP2022 Optic Cut: RMR

This Machining service allows you to mount a RMR footprint optic onto your supplied SP2022 slide. Optic milling is placed forward of the rear sights and a stainless steel plug will be epoxied into the factory internal lightening cut to provide material to drill and tap into.  The mounting pocket is milled .150″ deep.   The slide is drilled and tapped to accept 6-32 screws. There are threaded posts around the screw holes to locate and secure the optic.

Cerakote is an additional service and can be found HERE

This service requires you send in your factory slide for the machining to be done. Fabricated Arms will disassemble and reassemble your slide if you choose to not do so yourself. Include a cover letter with your information when sending in your slide. Fabricated Arms will send the machined slide back to you when complete. Slide will be returned to you with a raw machined pocket unless you request your slide to be cerakoted. An additional cerakote service is available under the cerakote tab. It is preferred that you send your optic along with your slide to ensure proper fitment.