P320 Romeo1/Romeo1Pro to RMR Conversion

$60. 00$460. 00

This Machining service allows you to mount a Trijicon RMR optic onto your supplied P320 slide with existing Romeo1 or Romeo1Pro optic cut. On the Romeo1 cut slides, the front of the pocket is slightly contoured to allow the optic to seat flush and two new holes are drilled and tapped. On the Romeo1Pro cut slides 2 new holes are drilled and tapped. This service is not available for the X Five! The lightening cut underneath of the optic cut prevents this.

If you want Fabricated Arms to supply you with an optic and install it, select an optic from the drop down menu.

Cerakote is an additional service and can be found HERE

This service requires you send in your factory slide for the machining to be done. Fabricated Arms will disassemble and reassemble your slide if you choose to not do so yourself. Include a cover letter with your information when sending in your slide. Fabricated Arms will send the machined slide back to you when complete. Slide will be returned to you with a raw machined pocket unless you request your slide to be cerakoted. An additional cerakote service is available under the cerakote tab. It is preferredĀ that you send your optic along with your slide to ensure proper fitment.

SKU: N/A Category: